Speeder 2 - The light car carrier

The Speeder 2 is not only convincing with a payload of up to 2.6 t (at 4.7 t ZGG). It not only achieves car-like driving characteristics, but also offers a high level of safety and economy during use. This is made possible by the standard automatic air suspension of the two 1,600 kg rear axles and the integrated disc brakes. Thanks to the ramp angle of only approx. 8°, a fast loading process is made possible.

With the extremely low unladen weight starting at 2.2 t, the Speeder 2 is one of the lightest car transporters in its class and as a 3.5 tonne truck, you can drive with driving licence class B (passenger car). Enjoy all the advantages of the 3.5 t gross vehicle weight regulation, there are no toll charges and no tachograph is required (without trailer operation). Sunday driving bans and truck overtaking bans apply with this registration do not apply to the FIT-ZEL Speeder.

Main advantages of Speeder 2

Driving license class B (PKW)

No toll charges (DE)

disc brakes

Technical information

The base vehicle is a VW T6 as a single cab (Zugkopf / motor head) or double cab, 150 or 204hp, with manual or automatic Transmission.

payload up to 2,6 t depending on the chassis
loading angle
loading length 5.100 mm
loading width 2.100 mm

We are at your disposal for a consultation at any time.

Inquire now

Fon: +49 (0) 8067 / 90 57 - 0

Choose your brand for the Speeder 2 Construction

High payload at 3.5 t total weight

With the FIT-ZEL Speeder 2, EDER presents a light and agile vehicle transporter, which can convince with numerous advantages in professional vehicle transport.

With approval in the 3.5 t class, the FIT-ZEL Speeder 2 can convince with its high payload of up to 1.4 t.

With a gross vehicle weight of 4710 kg, a payload of 2.6 t payload can even be achieved. In this design, a heavy-duty low-load chassis made of aluminum-steel Compoud construction can be used.

Seven days like a car in action

The approval version with 3.5 t offers numerous advantages in everyday use. So it is possible to classify the car transporter as a car. So he can be driven with driving license class B (cars). The speed limits apply to cars.

In addition, there are no tolls and it requires no tachograph (without trailer operation). Sunday driving bans and truck overtaking bans do not apply to this approval for the FIT-ZEL Speeder.

Added to this is its cost-efficiency in purchasing and in daily operation. An important factor for this is the consistent and high-quality lightweight design made of aluminum / steel compound.

Easy Load

Thanks to the electromechanically tiltable loading platform made of aluminum, the time-saving loading and unloading of the FIT-ZEL Speeder 2 becomes a matter of course.With a loading height of only 63 cm and the low contact angle of only 7.5 ° clear advantages in the range of labor productivity of the FIT-ZEL Speeder 2 arise. Also contributes to the automatic lowerable air suspension.



landing gear

The unique chassis of the FIT-ZEL Speeder 2 has been designed for professional use by the chassis specialists of the EDER Group.
Thanks to the compressor-controlled level-regulated air suspension, an optimal driving behavior is ensured.

The two 1,600 kg axles are equipped with disc brakes and 195/50 R13C wheels on alloy wheels. The innovative technology ensures car-like driving characteristics. The low center of gravity ensures optimum handling when cornering.

This is how the safety and comfort of the FIT-ZEL Speeder 2 are ideally combined.

Dual Use - Double cab

The FIT-ZEL Speeders 2 with double cab offers plenty of space for the vehicle and can take up to 6 passengers. In this variant, the car transporter can be used as breakdown service vehicle and workshop vehicle. The complete setup "breakdown and tool set" can easily be accommodated in the double cabin. You can also order the version with a double cabin with a loading length of 5.100 mm. (At present, the version with double cab is not yet available on Ford Transit)

download area

We offer frequently requested brochures and vehicle information for download.

Get more information now

Equipment for Speeder 2

middle ground

  • Aluminum key profile
  • Plastic fiberglass reinforced

aluminum rims

7.00 x 16 ET-50 Futura Superlook, aluminum rim Volkswagen T5 and T6 in 16 "only for 140/150 hp version

Electric winches

Extra strong and laterally movable, with a lifting capacity of up to 3.5 t. Winches allow the recovery of vehicles that are no longer fit to drive. Our electric winches are equipped with planetary gearbox, forward and reverse, free-wheeling and an optional radio remote control. Winch ropes are available as lightweight cust fiber or steel rope with safety hooks.

Weather protection cover

made of aluminum checker plate, foldable with gas spring

Loading ball - a round thing for the safe transport of trailers

Small, round and effective. With the trailer loading ball, a fuse for the transport of loaded trailers can be provided on the front of the loading area. The loading ball is mounted on an additional truss and has a 13-pin socket to illuminate the loaded trailer.

Attention use - the warning console

Good lighting conditions for safety. This also applies, for example, to the loading of vehicles in the street. For these and other purposes, the Speeder 2 can be equipped with a 1460 mm wide warning console with LED flashing modules, two powerful LED work lights and a three-chamber tail light. The complete warning console is mounted on the large flyer or light carrier.


Gute Sicht auf die Ladung – Die Arbeitsscheinwerfer

Wer die Ladefläche zu jeder Uhrzeit und Helligkeit im Blick haben will, kann dies mit den verstellbaren und lichtstarken LED Arbeitsscheinwerfer sicherstellen. Diese werden links und rechts am Flyer/Leuchtenträger montiert.

Everything in view - the panorama mirror

You can keep an eye on everything with the large panorama mirror, which can be mounted on request in the large flyer or light carrier. The panorama mirror enables fast, safe and damage-free loading. With the panorama mirror as start-up aid, you avoid collision damage, because you always have problem areas in view, and thus fully utilize the loading area, even on longer vehicles. They load a vehicle without a second person.

lade rails

You can easily load vehicles with small gauges or trailers: with an optional, extendable center ramp.
With optional 3-piece ramps a low approach angle of only about 3.5 ° can be made possible, eg. B. for sports cars.

Flat, flat, drive-up wedges

With the help of the optional 3-part ramp wedges, you can reduce the low ramp angle of the Speeder 2 to 4°. This means that transporting many lowered sports cars, for example, is no problem.

tool boxes

Lockable storage spaces under the loading area left and right in front of the axles.
Dimensions: 645x 200 x 300 mm

Handle-light carrier

With grab handle left and right.


Hitch detachable including 13 pin socket.

The override trailer - comfortable to the Road Train!

Together with the FIT-ZEL Euro-Trans override trailer, the Speeder 2 becomes a roadtrain. It can easily be transported two vehicles comfortably.

The practical self-tipping mechanism of the trailer and the ramps allow the vehicles to be charged during use. The Überfahranhänger Euro-Trans is tuned with its track exactly on the bed width of the Speeder 2. When empty, the override trailer simply drives along on the towing vehicle.

In just a few steps to the Road Train: Attach the Euro-Trans trailer to the Speeder 2 and fold the ramps to the overpass bridge. Drive the trailer with the first vehicle and drive over to the towing vehicle. Drive the trailer with the second vehicle and after lashing the vehicles you can start!

Plane and box platform

Protect especially valuable cargo from prying eyes or the weather.

We are at your disposal for questions about the Speeder 2 at any time.

Inquire now